SINGLE 01.02.2013
English / Englisch
MAINTENANCE AND REPLACEMENT OF WEARING PARTS
6.3 REPLACING THE WHEELS
Always use original LÄGLER
®
wheels (For part nos. please see
Section 11, Spare parts
).
1
Switch off the machine and pull the extension cable out of
the socket.
2
Use a suitable pair of circlip pliers to remove the retaining
ring from the wheel axle. Remove the washer and the wheel
(Fig. 35).
3
To mount the new wheel, follow the instructions above in
reverse order.
6.4 REPLACING THE CENTERING DOME ON THE
SANDING PLATE
1
Remove the sanding plate from the SINGLE and lay it on the
floor with the flat side down.
2
Turn the centering dome
clockwise
out of the sanding plate
with an open-ended or ring spanner (LEFT-HANDED THREAD,
Fig. 36)!
3
To mount the new centering dome, screw it
anti-clockwise
into the sanding plate (LEFT-HANDED THREAD)!
Fig. 35
Remove the retaining ring and remove the washer
and the wheel. Install again in reverse order.
Fig. 36
To remove the centering dome, turn it
in a clock-
wise
direction (LEFT-HANDED THREAD)!
6
19
Summary of Contents for SINGLE
