Lagler SINGLE, Operation Maintenance Safety

SINGLE  01.02.2013

English / Englisch

INTRODUCTION

Introduction

1.1  FEATURES OF THE MACHINE

Fig. 1 (page 2) shows the most important assemblies which make 

up the SINGLE. We recommend that you take some time to become 

familiar with the machine.

1.2  DESCRIPTION OF THE MACHINE

The SINGLE single-disc sanding machine operates with a sanding 

plate to which Velcro-backed sanding discs can be attached. Of 

course, the traditional type of sanding disc with a fastening screw 

can also be used on the machine. The work zone is covered by 

the machine housing. In the machine housing, the electric motor 

is mounted vertically together with the gear. It is protected from 

sanding dust by the motor cover. The plug for connection to the 

mains is located on the machine housing. The motor switch with 

the switch positions ON/OFF is located in the handle at the top end 

of the guide tube. The machine is moved with this handle. At the 

back of the machine are two wheels which the machine runs on 

when it is moved.

The SINGLE single-disc sanding machine is intended for dry use 
only. Never attempt to use the SINGLE for any type of wet operation 
(risk of fatal accidents)!

1.3  INTENDED USE OF THE MACHINE

The SINGLE single-disc sanding machine is suitable for sanding 

wooden and cork floors and for work on floor underlays in the pro-

fessional and DIY rental sectors. It can also be used for spreading 

care products and cleaning agents and for polishing floors.

Any application other than that described here is inadmissible 
without the consent of the manufacturer. Never use for wet op-
eration!

You are now the owner of a high-quality 
product manufactured by LÄGLER

®

. We 

wish you every success with the SINGLE. 
This machine has been manufactured using 
state-of-the-art production techniques. All 
LÄGLER

®

 products are subjected to thorough 

controls before they leave the factory. 

Please read right through these operating 
instructions before working with the SINGLE 
for the first time. The operating instructions 
contain important information relating to 
working safety and will answer many of 
your questions, permitting you to work con-
fidently and safely with the machine. If you 
require information which is not provided 
in these instructions, refer to your sanding 
instructions or consult our Customer Ser-
vices Department, which will be pleased to 
advise you. Our fully trained and qualified 
service technicians are very familiar with 
the SINGLE and will be able to provide any 
assistance you may need.

1

4