SINGLE 01.06.2019
English / Englisch
2.2 GENERAL SAFETY INSTRUCTIONS
•
Check the machines for damage!
Check regularly and after a longer non-use of the machine
- the proper functioning of protective devices and moving
parts,
- the parts including extension cables and motor cables for
damage and wear.
Damaged protective devices and damaged or worn parts
must be properly repaired or replaced by an authorized
service shop insofar as nothing to the contrary is indicated
in the operating instructions (
Section 11, Spare parts
SINGLE
).
Damaged electrical components must be replaced with
Original spare parts from LÄGLER
®
by a qualified electrician
(
Section 11, Spare parts SINGLE
).
Do not use the machine if it cannot be switched on and/or
switched off by using its switch.
•
Maintain your machines with care!
- Always keep the machines clean so that you can work
better and more safely.
- Follow the maintenance guidelines and the instructions
for replacing tools.
- Keep the handles dry and free of oil and grease.
•
Provide good illumination in the workplace!
Well lit construction sites reduce the risk of injury and allow
you to better evaluate the quality of your work.
•
Keep your work area tidy!
Untidy work areas create a risk of accidents.
•
Use the proper machines!
Do not use low-performance machines or additional devices
for heavy jobs. Do not use the machines for purposes and
work for which they are not intended.
•
Do not overload the machines!
They work better and more safely in the power range noted.
•
Do not bend too far over the machines!
Avoid unnatural postures. Make sure that you stay in a stable
position and keep your balance at all times.
HAZARD WARNINGS AND SAFETY INSTRUCTIONS
2
13
