SINGLE 01.06.2019
English / Englisch
COMMISSIONING
4
4.4 SWITCHING OFF THE MACHINE
To switch off the machine, release both the start levers but keep a
tight hold on the machine with both hands on the handle, until the
sanding plate has come to a complete standstill.
CAUTION!
RISK OF INJURY and RISK OF PROPERTY DAMAGE:
• Never allow the machine to run unattended!
• Always remove the power plug from the socket after you
have switched off the machine!
RISK OF PROPERTY DAMAGE:
If the machine is not in use, remove the plate from the machine
to avoid the following negative effects:
• Damage to the surface which may be caused by the
abrasive of the sanding plate, the diamond segments or
the indexable inserts of the milling disc!
• Damage to the flexible Velcro ring of the sanding plate, the
diamond segments or the indexable inserts of the milling
disc which can be caused by the weight of the machine!
24
