SINGLE 01.06.2019
English / Englisch
MAINTENANCE AND REPLACEMENT OF WEARING PARTS
Maintenance and replacement
of wearing parts
WARNING!
RISK OF DEATH from electrical shock and RISK OF INJURY
from rotating parts of the machine:
• All extensive maintenance work, especially on the
electrical equipment, must be conducted by a qualified
expert for safety reasons!
• All maintenance work and all work on the electrical
equipment must be conducted with the machine switched
off and with the power plug removed from the socket!
CAUTION!
RISK OF INJURY and RISK OF PROPERTY DAMAGE:
• Only use original spare parts from LÄGLER
®
(
part
numbers in
Section 11, Spare parts SINGLE
)! This is
the only way to ensure that your machine continues to
perform! Warranty claims for foreign parts or damage
caused thereby cannot be accepted!
• Never conduct the maintenance work and replacement of
wearing parts on the newly sanded floor! Thus, you will
avoid scratches or other damage to the floor!
Periodically, but at the latest when you notice that damage
has occurred, a variety of maintenance procedures have to
be performed. For this work, always use original spare parts
manufactured by LÄGLER
®
. Work in a clean, well lit location and
proceed in accordance with these instructions. In the tool bag you
will find the necessary tools to carry out the work described below.
The inspection of the machine can be carried out in a short time and
avoids later complaints, which can be caused by minor damage to
the machine or worn parts. These measures contribute significantly
to maintaining the value of the machine and ultimately to your own
safety.
7
34
