SINGLE 01.06.2019
English / Englisch
Fig. 45
To remove the centering dome, turn it
in a clock-
wise
direction (
left-handed thread
)!
Fig. 44
The two screws with markings (
A
and
B
) are oil
drainage screws.
DO NOT UNSCREW THEM!
B
B
A
A
MAINTENANCE AND REPLACEMENT OF WEARING PARTS
7
CAUTION!
RISK OF PROPERTY DAMAGE:
The gear of the SINGLE is maintenance-free and contains
a special oil! The incorrect volume of oil can cause severe
damage to the gear!
For this reason, never open the oil drainage screws in the
motor shaft or in the gear cover (fig. 44, A and B)!
8
To assemble, follow the instructions above in reverse order.
Please ensure that the pattern of holes on the shock absorber
and the plate mounting match the pattern on the gear output.
7.3 REPLACING THE CENTERING DOME ON THE
SANDING PLATE
1
Remove the sanding plate from the SINGLE and lay it on the
floor with the flat side down.
2
Turn the centering dome
clockwise
out of the sanding plate
with an open-ended or ring spanner (
left-handed thread
,
fig. 45)!
3
To mount the new centering dome, screw it
counterclock-
wise
into the sanding plate (
left-handed thread
)!
37