SINGLE 01.06.2019
English / Englisch
INTRODUCTION
1.4 PROTECTIVE DEVICES
The following parts of the machine are protective devices and must
accordingly be kept in perfect working order:
Machine housing
= Protection from sanding plate
and sanding disc
Dust extraction socket with cap = Protection from sanding plate
and sanding disc
Motor cover
= Protection from live parts
Handles on the guide tube
= Protection from live parts
Two-hand operation
= Protection against uninten-
tional starting of the machine
1.5 MACHINE CONFIGURATION
1.5.1 BASIC EQUIPMENT
•
1 Machine ready for operation
•
1 Operating instructions
•
1 Sanding plate
•
1 Extension cable, length: 10 m (394”):
for single-phase AC motor 3 x 2,5 mm² (3 x 0.0039 sq.in.)
for three-phase AC motor 5 x 1,5 mm² (5 x 0.0023 sq.in.)
•
1 Hexagonal socket wrench, size 5 mm
•
1 Hexagonal socket wrench, size 6 mm
•
1 Respiratory protection mask, filter class P3
1.5.2 OPTIONAL EQUIPMENT
•
Milling disc for work on floor underlays
•
Diamond sanding disc for work on floor underlays
•
Foldable earmuff
•
Safety switch for fault current PRCD-S (for German mains
supply)
1
NOTE:
You will find the corresponding part
numbers for the optional equipment and
wearing parts in
Section 11, Spare parts
SINGLE
.
6
