SUPERHUMMEL
01.11.2011
ENGLISH
•
Use the right machine!
Do not subject underpowered machines or attachments to excessive work loads. Refrain from using ma-
chines for purposes and work for which they are not intended.
•
Wear suitable work clothing!
Do not wear loose clothing or jewellery which could be caught in moving parts of the equipment.
•
Use safety device!
Use respiratory masks with filter class P3 when working in dust-laden atmospheres.
•
Only use the cable for its intended purpose!
Never use the cable to carry or pull the machine, or to pull the plug out of the socket. Protect the cable from
the effects of heat, oil, and sharp edges.
•
Never bend too far over the machine!
Avoid any abnormal posture. Make sure you are standing firmly and securely, keeping your balance at all
times.
•
Take good care of your machine!
Keeping your machine in a clean, tidy condition will allow you to work more efficiently and safely. Comply
with the maintenance regulations and the tool changing instructions. Check the cables regularly and have
them exchanged by an expert if damaged. Check the extension cable regularly and replace if damaged.
Keep all handles dry and free of oil and grease.
•
Pull the plug out of the socket!
When not using the machine, during performing maintenance work and when changing tools, the mains
plug must be pulled out of the socket.
•
Never leave setting tools or attachments in the machine!
Before switching on the machine, always check that you have removed all setting tools and attachments.
•
Avoid unintentional start-up!
Ensure that the ON/OFF switch is not activated when connecting the machine to the mains.
•
Be alert to potential dangers!
Always keep a close watch on what you are doing. Act sensibly, never use the machine when you are having
difficulty concentrating.
•
Check your machine for damage!
Before making further use of the machine, check the safety devices or damaged parts with care and test
that all machine functions are in correct working order. Check whether moving parts are working correctly,
whether they are jamming, whether any parts are broken, whether all other parts are correctly mounted
and all other conditions which could influence operation of the machine are correct.
Unless otherwise specified in the operating instructions, damaged safety devices and parts must be repaired
or exchanged professionally by an after-sales workshop. Damaged switches must be replaced by an after-
sales workshop. Never use machines with switches which cannot be turned on or off.
DANGER WARNINGS AND GENERAL SAFETY REMARKS
2
52
Summary of Contents for Superhummel
