UNICO 01.07.2019
English / Englisch
Fig. 32
The machine handle can also be screwed into the
fan housing.
Fig. 31
The machine handle is used in the kneeling
position to guide the attachment.
4.8 THE MACHINE HANDLE ON THE ATTACHMENT
The machine handle is installed on the front end of the long
attachment (type 350) and of the medium-sized attachment
(type 230). The machine handle is used in the kneeling position
to guide the attachment (fig. 31). The machine handle can be
unscrewed and then installed on the right-hand side or on the
left-hand side of the rear side of the fan housing. When you
are kneeling, you can then use the handle guide the machine in
inaccessible locations. In the case of the UNICO equipped with the
short attachment (type 105), the machine handle is installed on the
fan housing as a standard equipment feature.
1
Switch off the machine and pull the power plug out of the
socket!
2
Unscrew the machine handle out of the attachment.
3
Screw the machine handle into the right-hand side or into
the left-hand side of the fan housing and then tighten the
handle firmly by hand (fig. 32).
4
COMMISSIONING
25
