background image

 

Dake Corporation 

1809 Industrial Park Drive 

Grand Haven, MI 49417 

www.dakecorp.com 

 

 

 

 

983113 

REV112020 

DAKE STANDARD LIMITED WARRANTY 

 

Finished Machines 

Dake warrants to the original purchaser the finished machine manufactured or distributed by it to be 

free from defects in material and workmanship under normal use and service within 1 year (12 

months) from the delivery date to the end user. 

 

Parts 

Dake warrants to the original purchaser the component part manufactured or distributed by it to be 

free from defects in material and workmanship under normal use and service within 30 days from the 

delivery date to the end user. 

The standard limited warranty includes the replacement of the defective component part at no cost to 

the end user.  

 

Sale of Service (Repairs)

 

Dake warrants to the original purchaser the component part repaired by Dake Corporation at the 

manufacturing facility to be free from defects in material and workmanship under normal use and 

service within 90 days from the return date to the end user, as it pertains to the repair work 

completed. The standard limited warranty includes repair of the defective component part, at no cost 

to the end user. 

 

Warranty Process  

Subject to the conditions hereinafter set forth, the manufacturer will repair or replace any portion of 

the product that proves defective in materials or workmanship. The manufacturer retains the sole right 

and option, after inspection, to determine whether to repair or replace defective equipment, parts or 

components. The manufacturer will assume ownership of any defective parts replaced under this 

warranty.   

All requested warranty claims must be communicated to the distributor or representative responsible 

for the sale. Once communication has been initiated, Dake Customer Service must be contacted for 

approval: 

Phone: (800) 937-3253 

 

Email: 

customerservice@dakecorp.com

 

 

When contacting Dake, please have the following information readily available: 

  

- Model # 

  

- Serial # 

  

- Sales Order #  

 

Purchasers who notify Dake within the warranty period will be issued a Case number and/or a Return 

Material Authorization (RMA) number. If the item is to be returned per Dake’s request, the RMA 

number must be clearly written on the exterior packaging. Any item shipped to Dake without an RMA 

will not be processed.  

 

 

 

Summary of Contents for DAKE SE-810




































Reviews: