Part# VDL-18
8
REV#082020
-
The specifications and information in this manual were current at the time this
manual was approved for printing. Dake, whose policy is one of continuous
improvement, reserves the right, however, to change specifications or design at any
time without incurring obligations.
-
Always include the part number, model number, and parts description, for parts
orders or correspondence concerning your bandsaw, so we can supply you a
rapidly after-sales service.
▲
WARNING
1.
Read the operator’s manual carefully. Learn the tools applications and limitations, as
well as the specific potential hazards peculiar to it.
2. Always wear approved safety glasses/face shields while using this machine.
3. Make certain the machine is properly grounded.
4. Before operating the machine, remove tie, rings, watches, other jewelry, and roll up
sleeves above the elbows. Remove all loose clothing and confine long hair. DO NOT
wear gloves when operating.
5. Keep the floor around the machine clean and free of scrap material, oil and grease.
6. Always keep machine guards in place when the machine is in use. If removed for
maintenance purposes, use extreme caution, and replace the guards immediately.
7.
DO NOT
overreach! Always maintain a balanced stance.
Do not fall or lean against
blades or other moving parts.
8. Use only sharp blades. Dull blades are dangerous.
9. Make all machine adjustments or maintenance with the machine unplugged from the
power source.
10. Use the right tool. DO NOT force a tool or attachment to do a job which it was not
designed for.
11. DO NOT make cuts requiring more power than is available on the machine.
12. Replace warning labels if they become obscured or removed.
13. Make certain the motor switch is in the OFF position before connecting the machine to
power.
14. Give your work undivided attention. Looking around, carrying on a conversation. And
“horse-play” is careless acts that can result in serious injury.
Summary of Contents for Dake VDL-18
Page 38: ...Part VDL 18 38 REV 082020 Parts List Upper Wheel Assembly Parts List Below...
Page 42: ...Part VDL 18 42 REV 082020 Table and Fence Assembly Parts List Below...
Page 46: ...Part VDL 18 46 REV 082020 Upper Lower Blade Guides Assembly Parts List Below...
Page 58: ...Part VDL 18 58 REV 082020 VDL 18 Wiring Diagram...
