If the workpieces is less then 120mm,you must
use the push stick to prevent your hands from
getting too close to the saw blade.
Push block must be used to cut narrow
workpieces and, when necessary, to push the
workpiece against the fence, a push block can
be easily made by the operator as
Fig.2
,
5. Installation of the machine
5.1 Transportation of machines
5.1.1 Transportation and store
The measures of anti-rust and shockproof should
be taken during packing. The machine endures
transportation and store in -25~55°C ambient
temperature.
Be care of not making machine exposed to rain or
damaging the packing during transportation and
store.
While transporting or handling the machine, be
careful and let the activity be done by qualified
personnel especially trained for this kind of
activity!
While the machine is being loaded or unloaded,
make sure that no person or subject gets
pressed by the machine!
Select proper transportation device according
to the weight of the machine.
Make sure the lifting capacity of transportation
device is competent for the weight of the
machine.
