5.4.10 Electrical installation
1.
Wiring should only be done by professional
electricians. Always make sure the machine is
properly earthed.
2.
All wirings in the cabinets should be
protected against direct contact to at least IP2X
when finishing electrical installation.
3.
All exposed conductive parts should be
connected to the protective bonding circuit.
4.
Close and lock the door of cabinets
。
1. Enough space around the machine and the
cabinets should be kept in order to maintain
conveniently.
2. The machine should be installed in a
workshop
with
good
illumination
and
ventilation.
3. Over-voltage protection device should be
provided by end user on spot.
Check that the voltage and frequency required by
the machine, shown on the machine’s name plate,
correspond to the electric power supply voltage
and frequency.
The circuit breaker shall be installed for supplying
electric power to this machine, in order to protect
people against electrical shock due to indirect
shock
ELECTRICAL CONNECTIONS
