7
Receiving your machine.
Note.
It is probable that your machine will be delivered by a third party.
Before you unpack your new machine, you will need to first inspect the
packing, invoice and shipping documents supplied by the driver.
Insure that there is no visible damage to the packing or the machine. You
need to do this prior to the driver leaving. All damage must be noted on the
delivery documents and signed by you and the delivery driver. You must
then contact the seller [Laguna Tools] as soon as practical. If damage is
found after delivery, contact the seller as soon as is practical.
Note:
It is probable that you will find sawdust within your machine. This is
because the machine has been tested prior to shipment from the factory
and/or Laguna Tools.
Laguna Tools endeavors to test machines prior to shipping to customers as
movement can take place during transportation. It must be noted that
additional machine movement can take place between Laguna Tools and the
end-user, and some adjustments may have to be undertaken by the customer.
These adjustments are covered in the various sections of this manual.
Introduction to Lathes
.
This machine is designed to give you years of safe service. Read this
owner’s manual in its entirety before assembly or use.
Parts of the Lathe.
The lathe consists of a number of major parts, which are discussed in this
manual. Take the time to read this section and become familiar with the
machine.
Identification.
There is a plate at the back of the
machine listing all the manufacturing
data, including the serial number, model,
etc.
