6
NO.
POSITION
GREASE OIL
1
WORM GEAR
YES
NO
2
GEAR BOX
NO
YES
3
CHAIN
YES
NO
4
CHAIN
YES
NO
5
CHAIN
YES
NO
6
BRACKET
NO
YES
7
LEAD SCREW
YES
NO
8
COLUMN CLEAN & OIL
NO
YES
PARTS LUBRICATION REQUIRED
Fig. 8
- Worm Gear is used to adjust the table up or
down. (Fig. 9)
- The oil in Gear Box must be changed after 2500
hours of work. (Fig. 10)
- All chains must be lubricated regularly. (Fig. 11)
- After 30 hours or more of work the lubrication of
bracket must be changed. (Fig.12)
- The machine comes equipped with four head
screws,it is important to always keep them
lubricated. (Fig.13)
- To ensure maximum performance always keep
the sliding rolls of table lubricated (Fig.14).
CHANGE LUBRICANT
When lubrication needs to be changed:
1. Loosen the nut A on the outfeed hole.
2. Clean out old lubrication and let it dry.
3. Tighten nut A
4. Replace clean lubricant by hole B
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
