4. OPERATION
34
4-6. SLIDING TABLE
The sliding table is moved on high precision sideways which is made of hardened
steel for a uniform and smooth motion with less friction and obtain accurate cutting.
The sliding table is locked and unlocked by lever
A
(Fig. 4-6.1)
Lever up: sliding table unlocked
Lever down: sliding table locked
I. USE OF SLIDING TABLE AND FRAME FOR LARGE PANELS
Longitudinal positioning of the frame
Lock/Unlock the sliding table by means of rod A for placing large work piece
1.
Move the frame for your desired position with handle
B
(Fig. 4-6.1)
2.
Lock knob
A
(Fig. 4-6.1) for fixing.
※
To remove the sliding table of the machine over the saw blade center, please
move the sliding table a little back for opening the second positioning design
II. USE OF THE HOLD DOWN
1.
Loosen handle to adjust the foot height
※
To ensure a strong panel clamping, the foot shall be at a
2mm
height from the
panel surface before lowering the lever.
2.
By means of lever
H
(Fig. 4-6.2) lower foot
F
(Fig. 4-6.2) for clamping the work
piece
CAUTION:
Lock sliding table before placing heavy work piece for safe location.
Figure 4-6.1
B
A
F
H
Figure 4-6.2
Summary of Contents for P12 10
