6
Noise emission
Notes concerning noise emission:
Given that there exists a relationship between noise level and exposure times, it
is not precise enough to determine the need for supplementary precautions. The
factors affecting the true level of exposure to operators are clearly the amount of
time exposed; the characteristics of the working environment, such as other
sources of dust and noise, etc. For example, adjacent machines may impact the
level of ambient noise. It is also possible that exposure level limits will vary from
country to country.
Specification sheet
Receiving your oscillating edge sander
Note:
It is probable that your machine will be delivered by a third party. Before
you unpack your new machine you will first need to inspect the packing, invoice
and shipping documents supplied by the driver.Ensure that there is no visible
damage to the packing or the machine. You must do this prior to the driver
leaving. All damage must be noted on the delivery documents and signed by you
and the delivery driver. You must then contact the seller [Laguna Tools, Inc.] as
soon as is practical. If damage is found after delivery, contact the seller as soon
as is practical.
Note:
It is probable that you will find sawdust within your machine. This is
because the machine has been tested prior to shipment from the factory and or
Laguna Tools, Inc.
MSANOES6X89-2-0320
Motor
2hp [220v 1 ph]
Belt Size
6" x 89"
Oscillation
1/2”
Oscillation Adjustment
E-Z Knob
Belt speed
SFPM: 3900
Drum Diameter
4-1/4"
Main Table
30” x 10”
Main Table Height
Min/Max 37”- 42"
End Table
Cast Iron 12” X 12”
End Table Height
Min/Max 37”- 40"
Dust port
4”
Cabinet with Drawer
Yes
Miter Guage
Yes
Footprint
48" x 20"
Net Weight
258 lbs
Ship Weight
306 lbs
