LAGUNATOOLS.COM
13
Fire suppression.
Only operate in locations that contain a fire suppression
system or have a fire extinguisher nearby.
Static electricity.
Plastic dust lines generate high amounts of static
electricity as dust chips pass through them. Although rare, sparks caused by
static electricity can cause explosions or fire. To reduce this risk, make sure
all dust lines are thoroughly grounded by using a grounding wire.
Regular cleaning.
Regularly check the machine for excessive dust and
debris and clean. Make sure to regularly clean the surrounding area where
the machine is operated
—
excessive dust buildup on overhead lights, heaters,
electrical panels, or other heat sources will increase the risk of fire.
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
Please read and save these instructions. Read carefully before attempting to
assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain
instructions for future reference.
DO NOT EXPOSE THE MACHINE TO RAIN OR OPERATE THE MACHINE IN
DAMP LOCATIONS.
MOTOR SPECIFICATIONS
The typical main motor is 7-1/2 HP and is wired for 208-230 Volt, Three-Phase,
60 HZ, AC current. Confirm your motor electrical configuration before
connecting power! Before connecting the machine to the power source, make
sure the starter and switches are in the "OFF" position. Power
Cord and “plug”
are NOT included. These must be installed by a qualified technician/electrician
to meet all applicable codes.
Confirm electrical configuration (Voltage & Phase) of brush machine before
connecting to power source!
Summary of Contents for SuperMax SuperBrush 24 x 2
