Controller with cable fitted
Cabinet socket
Controller cable fitted to cabinet socket
0
1
Cleaning the Machine
The machine is shipped with the non painted surfaces protected from rust by a
film of grease.
The grease must be removed with WD40 [or similar] as grease attracts sawdust
and dirt. The surfaces should then be coated with a Teflon lubricant or similar.
Teflon tends to dry and will not attract sawdust and dirt.
Assembling the Controller
Fit the cable to the controller and ensure that the
screws are finger tight.
Note:
The cable has plugs at both ends that are
different. The plug with the screws fits into the
controller. The other plug fits into the cabinet socket.
Push the cable into the cabinet socket and it will snap
into position. Give the cable a light tug to ensure that
the plug has snapped into position. Please handle
DSP cable and connections carefully as they are
very delicate.
Summary of Contents for Laguna Series
Page 2: ......
