3HP Mobile Dust Cyclone Manual
36
EMPTYING OR REPLACING THE FILTER BAG
Periodically check the filter bag, if it is more than one third full, it is
recommended that you empty it.
NOTE:
If the filter bag gets too full, the weight may force it to pull away
from the band clamp, exposing the user to potentially harmful particulates.
1.
Release the spring-loaded band clamp at the bottom of the filter and
remove the filter bag.
2.
Empty or replace the filter bag and re-attach using the spring-loaded
band clamp.
EMPTYING THE DRUM
Periodically inspect the contents of the drum and empty as needed. To
inspect the contents of the drum:
1.
Raise the drum foot peddle bar to lower the drum to the floor.
2.
Roll it away from the machine, inspect and empty as needed.
ROUTINE INSPECTION
It is a good idea to routinely inspect any quality woodworking tool in order to
keep it in optimum condition. This includes inspecting all hardware for
tightness, ensuring the filter is clean, and cleaning debris and grime from any
surfaces and moving parts.
Summary of Contents for MDCCF32201
