Page | 15
SPECIAL PRIZE DOORS
To set up and load one or more special prize doors, follow the instructions below.
1.
From attract mode, press the red TEST button to enter the operator menu.
2.
Using the blue UP and DOWN buttons, scroll to the game settings option.
3.
Enter game settings by pressing the red TEST button.
4.
Using the blue UP and DOWN buttons, scroll to the special prize settings option.
5.
Enter special prize settings by pressing the red TEST button.
6.
Set the special prize to on and the prize type to door. Use the special prize difficulty
calculator to set the difficulty to the recommended level.
7.
Scroll down to the door settings option and enter it by pressing the red TEST button.
8.
Use the blue UP and DOWN buttons to scroll through the prize doors. Press the red TEST
button to set the selected door as a special prize door. A star will appear on the door, to
indicate that it has been set as a special prize door. A minimum of one door must be set as a
special prize door.
9.
Special prize doors may now be loaded the same way as major prize doors, through the load
prizes section of the operator menu. Follow the instructions above, beginning from step 4.
PRIZE ARMS
To load the minor prize arms, follow the instructions below.
1.
From attract mode, press the red TEST button to enter the operator menu.
2.
Using the blue UP and DOWN buttons, scroll to the load prizes option.
3.
Enter load prizes by pressing the red TEST button.
4.
Note the image on the bottom screen displays all relevant information.
a.
A red box over a minor prize arm represents an empty prize arm. A green box
represents a prize arm that has prizes loaded.
5.
Unscrew the prize locking pin by turning it in a clockwise direction and remove the pin by
pulling it all the way out.
6.
Attach the prizes to the hanging ties, ensuring there is a loose three finger gap in the
hanging tie. This ensures that the tie does not interfere with the operation of the prize arm.
7.
Load the prizes onto the prize arm by sliding the hanging tie over the entire arm. Ensure that
prizes are spaced so they are well presented, and not more than half the length of the prize
arm apart, as this could cause a prize dispensing error.
8.
Reinsert the prize locking pin into the center of the spiral, ensuring that the pin is
always
above
the hanging ties. Tighten the pin by turning it anti-clockwise.
9.
Once a prize arm has been loaded, use the blue UP and DOWN buttons to select the prize
arm that has been loaded on load prizes image.
10.
With the prize arm selected, press the red TEST button to mark a red/empty prize arm as
green/loaded.
11.
When you are finished loading prizes, press the green SERVICE button twice to return to
attract mode.
MINOR PRIZE SIZE GUIDELINES
When running on minor prize arms, LAI recommends that the below guidelines for prize dimensions
are followed, to ensure that prizes are vended correctly. Minor prize arm coils have a tight pitch to
ensure that they can hold enough prizes to get through a busy week with a standard minor prize
collection percentage, and can be filled to capacity.
Weight:
No less than 10g
Height:
15cm max (from the top of the tie to the bottom of the prize)
Width:
8cm max
Value:
Minor prize value should be approximately 30% of the price per play.
Summary of Contents for Color Match
