Page | 44
J7
–
Bidirectional Motor
1
MOTOR 9 B **
2
MOTOR 9 A **
3
GND **
4
GND **
5
MOTOR 10 B **
6
MOTOR 10 A **
** Italics means the signal is not used
Harness connector shell: JST VHR-6N
Harness connector pins: SVH-21T-P1.1
Each motor connection is driven by bidirectional H-bridge drivers. The drivers have built-in current
limiting set at 0.6A.
J8
–
Counter/Meter Connection
1
Major Prize Meter
2
Ticket/Capsule Meter
3
Coin 2 Meter
4
Coin 1 Meter
5
Minor Prize Meter
6
12VDC (fused)
7
12VDC (fused)
Harness connector shell: JST VHR-7N
Harness connector pins: SVH-21T-P1.1
Meters can be connected and powered by the fused pins 6 and 7. The PCB has on-board back-EMF
diodes for use with inductive meters so no additional diodes are needed in the harness nor meters.
Current per meter pin should be limited to 1.5A maximum.
J9
–
Prize Door Lock Motors
1
Prize door 1 motor
2
Prize door 2 motor
3
Prize door 3 motor
4
Prize door 4 motor
5
Prize door 5 motor
6
Prize door 6 motor
7
Prize door 7 motor
8
12V (fused)
9
12V (fused)
Harness connector shell: JST VHR-9N
Harness connector pins: SVH-21T-P1.1
Door lock motors can be connected and powered by the fused pins 8 and 9. The PCB has on-board
back-EMF diodes for use with inductive loads so no additional diodes are needed in the harness or
motors.
Motor current draw per pin should not exceed 1A maximum with total combined current draw not
exceeding 4A.
Summary of Contents for Color Match
