Operator's Manual –
Slam'N'Jam
©
LAI GAMES
Page 26
RUN TEST
ENTER
The Run Test can be entered by pressing the Test button once while in
the Switch Test or by pressing the Test button three times while in
Attract mode,
r r r
will be displayed on the 3-digit display.
SELECT
Operation of the Ball Gate Motor and Switch can be tested. To start the
test, press the Service button. The Service button is then pressed again
to alternately open and close the gate.
Refer to the following table for the status of the Ball Gate Run Test:
CODE DISPLAY
SWITCH FUNCTION
R-0
r - 0
Ball Gate is Closing
R-1
r - 1
Ball Gate is Opening
R-2
r - 2
Ball Gate is Closed
R-3
r - 3
Ball Gate is Open
Er5
E r 5
Ball Gate Closing Error
Er6
E r 6
Ball Gate Opening Error
EXIT
The Run Test is exited into Programmable Adjustments Mode by
pressing the Test Button once.
For More Information, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
