background image

https://www.lairdconnect.com/ 

35 

© Copyright 2020 Laird Connectivity.  

All Rights Reserved 

Americas

: +1-800-492-2320 

Europe

: +44-1628-858-940 

Hong Kong

: +852 2923 0610 

 

 

 

Configuration files and certificates can be uploaded to the device. These configuration files are called 

‘vendor configuration 

files

’ in TR-069 terminology. An ACS can be commanded to push these to a device or group of devices. The vendor 

configuration file can change a number of settings in bulk. It is useful to (re)configure a batch of new devices in the field. These 
settings include, LAN, WiFi, and LoRa radio settings (including the channel plan and other radio settings).  
A strategy to deploy configurations to the field is to modify a unit locally to the way you want it. Download the configuration file 
via TR-069 from a locally configured gateway, then upload that generated configuration file to be pushed to all the units once 
the system administrator is satisfied that all of the settings are correct on the 

‘golden unit’. A download is initiated by the ACS 

with the type “3 Vendor Configuration File”, and an upload is also initiated by the ACS with the type “3 Vendor Configuration 
File”. The ACS will not put a file extension on the downloaded file. It is a compressed tarball (.tar.gz) file.  
See the documentation for your ACS to determine how to initiate the 

‘3 Vendor Configuration File” upload command. 

 

 

Initiate a download by the ACS with type 

2 Vendor Log File

. This returns the log data. The same log data that can be obtained 

by the web interface. It is viewable with a text editor. 

 

The device configuration can be downloaded by the ACS with type 

3 Vendor Configuration File

. This allows a user to configure 

a device locally to their specification, then save the settings for distribution to a larger group of deployed units. This file will 
include LoRa settings, Wi-Fi settings, and IP settings. This includes the channel plan used by the Semtech UDP packet 
forwarder. This file can be uploaded to deployed gateways to update their configuration to match the device that was updated 
locally. It is always good practice to locally test any configuration changes you make, so that you know it works the way you 
want it to before deploying the changes to more units deployed in the field. See the documentation for your ACS to determine 
how to initiate the 

3 Vendor Configuration File

 download command.  

 

The following tables show all of the parameters supported by the gateway along with a description of each. Each entry in the 
table is designated as read (R), write (W), or object (O). The items designated as objects are nodes in the data model. All 
parameters are designated with an R, W, or both.  

The root of the data model is InternetGatewayDevice. 

 

Table 2: InternetGatewayDevice.Laird.DeviceInfo 

Parameter Name 

R/W 

Description 

Input 

Data 

InternetGatewayDevice.DeviceInfo 

Device info node 

N/A 

InternetGatewayDevice.DeviceInfo.SpecVersion 

Version of the TR-069 spec referenced by this 
implementation 

N/A 

InternetGatewayDevice.DeviceInfo.ProvisioningCode   

Code set by the ACS to indicate completed provisioning 

N/A 

InternetGatewayDevice.DeviceInfo.Manufacturer 

Device manufacturer 

N/A 

InternetGatewayDevice.DeviceInfo.ManufacturerOUI 

MAC address OUI value for the manufacturer 

N/A 

InternetGatewayDevice.DeviceInfo.ProductClass  

Product type 

N/A 

InternetGatewayDevice.DeviceInfo.SerialNumber 

Unique value assigned to each device at production 

N/A 

InternetGatewayDevice.DeviceInfo.HardwareVersion  

Hardware version 

N/A 

InternetGatewayDevice.DeviceInfo.SoftwareVersion 

Software version 

N/A 

InternetGatewayDevice.DeviceInfo.MemoryStatus 

MemoryStatus node 

N/A 

InternetGatewayDevice.DeviceInfo.MemoryStatus.Total 

Total system memory 

N/A 

Summary of Contents for 450-0190




























































Reviews: