www..lairdconnect.com/wireless
23
© Copyright 2020 Laird Connectivity. All Rights Reserved
Americas
: +1-800-492-2320
Europe
: +44-1628-858-940
Hong Kong
: +852 2923 0610
The development board connects the Pinnacle
™ 100 modem to a virtual COM port of a PC or other device. From a PC, you
can communicate with the modem using
(cross platform software available for Windows,
Mac, and Linux). This utility allows connections to serial devices using any combination of the communications parameters
listed in
Table 7: UwTerminalX communication parameters for Pinnacle
™ 100
Port (Windows)
1 to 255
Port (Mac/Linux)
Any /dev/tty device
Baud Rate
1200 to 1000000
Note:
Baud rate default is 115200 for Pinnacle
™ 100.
Parity
None
Data Bits
8
Stop Bits
1
Handshaking
None or CTS/RTS
Note:
Baud rates higher than 115200 depend on the COM port capabilities of the host PC and may require an external USB
– RS232 adapter or
ExpressCard
– RS232 card.
The benefits of using UwTerminalX include the following:
▪
Continually displayed status of DSR, CTS, DCD, and RI
▪
Direct control of DTR on the host PC via a check box
▪
Direct control of RTS, if CTS / RTS Handshaking is disabled when UWTerminalX is launched
▪
Sending UART BREAK signals. Following provides explanation UART Break.
(
https://en.wikipedia.org/wiki/Universal_asynchronous_receiver/transmitter#Break_condition
Laird Connectivity offers a variety of documentation and ancillary information to support our customers through the initial
evaluation process and ultimately into mass production. Additional documentation can be accessed from the Documentation
tab of the
For any additional questions or queries, or to receive technical support for this Development Kit or for the Pinnacle
™ 100
modem, please contact Embedded Wireless Solutions Support:
https://www.lairdconnect.com/resources/support
© Copyright 2020 Laird Connectivity. All Rights Reserved. Patent pending. Any information furnished by Laird Connectivity and its agents is
believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird
Connectivity materials or products rests with the end user since Laird Connectivity and its agents cannot be aware of all potential uses. Laird
Connectivity makes no warranties as to non-infringement nor as to the fitness, merchantability, or sustainability of any Laird Connectivity
materials or products for any specific or general uses. Laird, Laird Connectivity, Inc., or any of its affiliates or agents shall not be liable for
incidental or consequential damages of any kind. All Laird Connectivity products are sold pursuant to the Laird Connectivity Terms and
Conditions of Sale in effect from time to time, a copy of which will be furnished upon request. When used as a tradename herein,
Laird
means
Laird PLC or one or more subsidiaries of Laird PLC. Laird™, Laird Connectivity™, corresponding logos, and other marks are trademarks or
registered trademarks of Laird. Other marks may be the property of third parties. Nothing herein provides a license under any Laird or any
third-party intellectual property right.
Summary of Contents for 453-00010-K1
Page 1: ...Version 1 0 ...
