20
www.lairdtech.com
Laird Technologies
CL2510
RF Transceiver
Clear Button
Pressing the Clear Button will erase all of the text that has been displayed in both text windows.
Font Button
Pressing the Font button will bring up a font selection window allowing the font used in the text boxes for both
terminals to be changed. Both terminals will use the same font.
COmmAND TAB
The Command tab is used to send configuration, CC (product family dependent) and AT commands (product
family dependent) to the radio on the selected port. Below is an example of the Command tab for the CL2510
product family:
Radio Buttons
The application sends one command at a time. The command can be selected by clicking the radio button next
to that command.
Command Name Field
The Command Name field consists of a list of the most commonly used commands for the module. Additional
commands may be added to the list. The length of the Command Name is not restricted and is not required by
the application.
Command Field
The Command field contains a list of the commands for each of the command names in the Command
Name field. When a command name is selected in the Command Name field, the command that is in the
same position in the adjacent Command field is the command that will be sent to the radio.
Optional Comments Field
The Optional Comments field is where the user may enter any comments that they would like to accompany
the command information. This field is not restricted in length and is not required by the application.
The description for a particular command will be displayed when that commands radio button is selected.
Received Data Port 1/Port 2 Window
Data received over the serial port while on the Command tab (whether in response to a command or not) will
be displayed in the Received Data window in hexadecimal format.
CONFIgURATION
SOFTWARE
OVERVIEW
Summary of Contents for ConnexLink CL2510
Page 28: ......
