DVK-BT730 Development Kit
Quick Start Guide - SPP
Americas: +1-800-492-2320 Option 2
5
Laird Technologies
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
www.lairdtech.com/bluetooth
Figure 9: COM ports displayed
Connecting from PC to Module
To connect to the DVK-BT730 from the PC, open a second instance of Laird / EZURiO terminal using the
outgoing computer COM port (COM43) noted in the previous step.
In the example below, the first Laird / EZURiO Terminal is connected to the module (COM16) and the second
Laird / EZURiO Terminal is connected to virtual COM 43 on the PC. When the second Laird / EZURiO terminal
(COM43) is opened, the connection is made and you should see a RING message followed by a CONNECT
message from the module (
The 12 characters following the RING and CONNECT messages are the Bluetooth address of the remote
device. The four characters following the BT address indicate the UUID, where 1101 is serial port profile.
Figure 10: Connection made
