Laird Sentrius BT510 User Manual Download

Page: 25 / 25

https://www.lairdconnect.com/iot-devices/iot-

sensors/bt510-bluetooth-5-long-range-ip67-multi-sensor

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852 2923 0610

Please contact your local sales representative or our support team for further assistance:

Laird Connectivity
Support Centre:

https://www.lairdconnect.com/resources/support

Email:

wireless.support@lairdconnect.com

Phone: Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610

Web:

https://www.lairdconnect.com/iot-devices/iot-sensors/bt510-bluetooth-5-long-range-ip67-multi-sensor

Note:

This is a first production release version of this BT510 user guide.

Information contained in this document is subject to change.

accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials or

products rests with the end user since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to non-

infringement nor as to the fitness, merchantability, or sustainability of any Laird materials or products for any specific or general uses. Laird,

Laird Connectivity or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are

sold pursuant to the Laird Terms and Conditions of Sale in effect from time to time, a copy of which will be furnished upon request. Other

marks may be the property of third parties. Nothing herein provides a license under any Laird or any third-party intellectual property right.

Summary of Contents for Sentrius BT510


























Search results

Summary of Contents for Sentrius BT510

Reviews:

Related manuals for Sentrius BT510

Brands by name

Popular brands

Laird Sentrius BT510, User Manual

Search results

Summary of Contents for Sentrius BT510

Reviews:

Related manuals for Sentrius BT510

Brands by name

Popular brands