https://www.lairdconnect.com/
2
© Copyright 2021 Laird Connectivity, Inc.
All Rights Reserved
Americas
: +1-800-492-2320
Europe
: +44-1628-858-940
Hong Kong
: +852 2923 0610
Model
Man.
PN
Type
Conn.
Peak Gain
698-
824
824-
894
880-
960
1350-
1550
1550-
1690
1690-
1880
1850-
1990
1910-
2170
2300-
2500
2500-
2700
3300-
4200
4900-
6000
Revie
Flex 700
EFF6989A3
S-19MHF1
PCB
Dipole
IPEX
U.FL
0.9
1.4
2.7
3.2
4.2
4.1
3.7
3.9
3.7
3.5
3.3
4.5
Note:
The OEM is free to choose another vendor’s antenna of like type and equal or lesser gain as an antenna appearing in
the table and still maintain compliance. Reference FCC Part 15.204(c)(4) for further information on this topic.
To reduce potential radio interference to other users, the antenna type and gain should be chosen so that the
equivalent isotropic radiated power (EIRP) is not more than that permitted for successful communication.
The 453-00010 and the 453-00011 hold full modular approvals. The OEM must follow the regulatory guidelines and warnings
listed below to inherit the modem approval.
Part #
Form Factor
BLE TX Pout
BLE Antenna
LTE TX Pout
LTE Antenna
453-00010
M2 Key E
6 dBm
PCB Trace
23 dBm
Bent Metal
453-00011
M2 Key E
6 dBm
U.FL
23 dBm
U.FL
This EUT complies with SAR for general population/uncontrolled exposure limits in FCC Part 1.1307, Part. 1310 and FCC
KDB 447498
– RF Exposure Procedures and Equipment Authorization Policies for Mobile and Portable Devices.
This transceiver must not be co-located or operating in conjunction with any other antenna, transmitter, or external amplifiers.
Further testing/evaluation of the end product will be require
d if the OEM’s device violates any of these requirements.
The Pinnacle™ 100 is fully approved for mobile and portable applications.
WARNING
:
The OEM must ensure that FCC labelling requirements are met. This includes a clearly visible label on the
outside of the OEM enclosure specifying the appropriate Laird Connectivity FCC identifier for this product.
Contains FCC ID: SQG-PINNACLE1
Thee following FCC part 15.19 statement must also be available on visible on outside of device:
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation
Label and text information should be in a size of type large enough to be readily legible, consistent with the dimensions of the
equipment and the label. However, the type size for the text is not required to be larger than eight points.
CAUTION
: The OEM should have their device which incorporates the
Pinnacle™ 100
tested by a
qualified test house to verify compliance with FCC Part 15 Subpart B limits for unintentional
radiators.
CAUTION
: Any changes or modifications not expressly approved by Laird Connectivity could void the
user’s authority to operate the equipment.
