Sentrius RG1xx
Quick Start Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
8
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Figure 6: Web interface
–
second screen
6.
Log on using the following default credentials (
Figure 7
):
Username: sentrius
Password: RG1xx
Figure 7: Gateway interface login screen
5
C
ONNECTING THE
G
ATEWAY TO THE
I
NTERNET
5.1
Setting Up Ethernet
By default, the Ethernet port is set up for DHCP addressing. Connect the Ethernet cable to a network with
internet access. If more advanced Ethernet configuration is needed, please see the Sentrius RG1xx User Manual
in the documentation tab of the RG1xx product page at lairdtech.com:
www.lairdtech.com/products/rg1xx-lora-gateway
.
5.2
Setting Up Wi-Fi
By default, the Wi-Fi in the gateway is not configured to connect to a Wi-Fi network. You must access the web
interface on the gateway via the Ethernet interface to setup the Wi-Fi connection.
To set up the Wi-Fi, follow these steps:
1.
Once logged into the web interface, navigate to the Wi-Fi page (
Figure 8
).
