background image

 

1.  About this Manual 

This Operational Manual addresses the needs of the user of the unit. Its intention is to allow the safe 

operation of the unit. Thus, it should be read carefully and be kept in a space accessible for the users 

of the unit at any time. 
All chapters of this Operation Manual can be read independently and thus can be used for look-up 

purposes. 

1.1 Terms of Guarantee 

General sale and delivery terms of LAIRD apply. The buyer accepts these terms, at the latest when 

signing the contract of purchase. 
The particular terms of guarantee and duration of guarantee of the unit in question can be taken from 

the contract documents as well as from the order confirmation. 
Warranty claims and liability are excluded in case of one of the following situations: 

  Use of the unit in an unintended way 

  Inaccurate installation, putting into service, operation, repair or maintenance of the product by 

people that are not fully authorized 

  Use of the product despite of defect, wrongly implemented or non-functional safety devices or 

protective gear 

  Unauthorized or forbidden modifications by the user concerning the electrical equipment of the 

unit  

  Unauthorized or forbidden modifications by the user concerning the mechanical structure of the 

unit  

  Unauthorized or forbidden modifications by the user concerning the operating parameters 

  Use of unauthorized tools 

  Use of unauthorized operating supplies 

  Exceedance of mandatory maintenance intervals 

  Cases of disaster caused by foreign matter influence or act of nature beyond control 

PLEASE NOTE 

Any form of unintended use of the unit and any structural change caused by the user without prior 

authorization in written form by LAIRD will lead to the termination of warranty as well the termination of the 

declaration of conformation and will free LAIRD from product liability. This concern includes safety devices 

as well. 

In case of authorized changes or when adding optional equipment, it is the sole responsibility of the 

customer to assure the accurate implementation of the safety devices required. 

 

 

Summary of Contents for WL 5000
























Reviews: