15
PCB LAYOUT, ADJUSTMENTS, JUMPER SETTING
C-L-G
C-L-G
C-L-G
Pin 1 from XLR socket
connected to internal
Ground-Plane.
(ex Works setting)
Pin 1 from XLR socket
lifted.
Pin 1 from XLR socket
connected to case.
.
Left / Right Meter
sensitivity adjustment
Approx. +6 … +25 dBu
for 0 dBr LED
Ex Works adjusted to
+15 dBu for 0 dBr LED
Left / Right Gain Fine Trim
Total range approx. +/- 0,5 dB
Adjustment:
With 0 dBu input signal and
+18 dBGain adjust to +18 dB
output level.
