ELECTRICAL CONNECTIONS
THIS APPLIANCE MUST BE EARTHED
This appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in all homes fitted
with sockets to current specifications. If the fitted plug is not suitable for your socket outlets, it should be
cut off and carefully disposed of. To avoid an electric shock, do not insert the discarded plug into a socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must be connected as shown here.
The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:
Connect BLUE to Neutral (N)
Connect GREEN & YELLOW to Earth (E)
Connect BROWN to Live (L)
13 amp fuse to be used
If the colours of the wires in the mains lead of this appliance do not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows. The wire which is coloured green and
yellow MUST be connected to the terminal which is marked with the letter E (Earth) or coloured green.
The wire which is coloured blue MUST be connected to the terminal which is marked with the letter N
(Neutral) or coloured black. The wire which is coloured brown MUST be connected to the terminal which
is marked with the letter L (Live) or coloured red.
Before refitting the plug cover, check that there are no cut or stray strands of wire inside the plug. Use a
13 amp BS1362 fuse. Only BSI or ASTA approved fuses should be used. If you are at all unsure which plug
or fuse to use, always refer to a qualified electrician.
Note: after replacing or changing a fuse on a moulded plug which has a fuse cover, the cover must be
refitted to the plug; the appliance must not be used without a fuse cover. If lost, replacement fuse covers
can be obtained from an electrical shop. This appliance complies with the following EEC Directives: 73/23
EEC (Low Voltage Directive) and 89/336 EEC (EMC Directive).
0001
E
Earth(green/yellow)
L
N
Neutral(blue)
1
3
a
m
p
F
U
S
E
13amp fuse
Live(brown)
CARE AND CLEANING
Before cleaning the cupcake maker, ensure it is unplugged from the mains socket and completely cool.
Wipe the outside and the non-stick cooking surfaces with a damp cloth, then dry with a soft cloth. Remove
any baked-on food with a plastic-bristled brush or a nylon mesh pad. Abrasive cleaners, steel wool and
scourers will damage the cupcake maker and should be avoided. If you need to use washing-up liquid,
apply a little to the cloth, rather than directly onto the cupcake maker, and ensure all traces are wiped
away.
CAUTION: never immerse the cupcake maker in water or any liquid, and never pour water onto the
cooking surfaces.
Store the cupcake maker with the power cord loosely coiled; never wrap it tightly around the cupcake
maker as this may damage the cord.
RECYCLING YOUR ELECTRICALS
Along with many other high street retailers, Lakeland has joined a scheme whereby customers can take
their unwanted electricals to recycling points set up around the country. Visit
www.recycle-more.co.uk
to find your nearest recycling point.
Cupcake Maker IB A:Layout 1 14/4/10 16:00 Page 11
