8
BEFORE USING THE TOUCHSCREEN SOUP MAKER
FOR THE FIRST TIME
•
WARNING:
Do not insert the plug into an electrical outlet, or turn on the Soup Maker
before you have fully assembled it.
• Unpack the Soup Maker, remove all the packaging materials.
• Before first use, wipe the base unit and outside of the jug with a clean damp cloth.
USING THE AUTO CLEAN SETTING
The jug is one complete unit which includes the blades, heating plate, jug and
handle. Do not attempt to remove the jug from the heating plate. The jug
cannot be immersed in water. Use the
AUTO CLEAN
setting to clean inside the jug and
underneath the blades.
• Place the base unit on a flat, dry heat resistant surface near a socket.
• Fill the jug with 1000ml of water and 3 or 4 drops of washing-up liquid.
• NOTE: When the jug is full of liquid, it becomes very heavy.
Lift the jug onto the base unit with both hands, the
notch on the back of the jug fits into the groove on the
base unit.
• Add the lid and firmly click the measuring cup into place. The Soup Maker will not
work unless the lid is in place, this is a safety feature.
• Plug in and switch the appliance on at
the socket. The
ON/OFF
button will
illuminate. Press the
ON/OFF
button to
switch on and illuminate the display.
Press the
AUTO CLEAN
button - a line will
appear underneath, and the
START/STOP
button will flash.
• The timer will show 5 minutes, this is the length of the cycle.
• Press the
START/STOP
button to start cleaning the jug. The Soup Maker will bleep 3
times each time the blades blend throughout the cycle.
Notch
Groove
