11
INSTRUCTIONS FOR USE
• Make sure the 2-in-1 Hand and Stand Mixer is unplugged and on a level, dry surface.
• When you switch on the appliance for the first time there may be a slight burning smell,
this is normal and will stop after a few uses.
• Press the release button on the stand and raise the
cradle.
• Place your ingredients into the mixing bowl.
• Press the release button on the stand and lower the mixer until it clicks into place.
• Plug in the 2-in-1 Hand and Stand Mixer and switch on at the socket.
• Use the speed switch, sliding sideways, to select your desired speed. Start off on ‘1’ then
increase the speed as required.
• You can press the turbo button while mixing for a short fast burst of speed.
• When your mixture is ready move the speed switch back to ‘0’ and lift the mixer using the
release button on the stand.
• The beaters and dough hooks can only be removed when the speed switch is in the ‘0’
position.