background image

14

FREQUENTLY ASKED QUESTIONS

Question:

   Why is my 2-in-1 Hand and Stand Mixer not working?

Answer: 

 

The mixer may not be plugged in or the speed has not been selected.  

 

Check the mixer is plugged in and switched on. Move the speed switch  

 

up a setting.

Question: 

  Why are the beaters struggling to rotate?

Answer:

  

The mixture is too thick, add more liquid. If your recipe states otherwise, 

 

your mixture cannot be mixed with a mixer. You may need to soften the  

 

ingredients or chop them into smaller pieces before further mixing.

Question: 

  Why is my mixture splattering?

Answer: 

 

The speed setting is too high. Select a lower speed and fully lower the 

 

beaters into the mixture before starting to mix.

CARE AND CLEANING

•  Switch off and unplug the 2-in-1 Hand and Stand Mixer at the socket before cleaning  
  and when not in use. 

•  Press the eject button and remove the beaters/hooks from the mixer before cleaning.

•  Clean thoroughly before using for the first time and after every use.

•  Check the parts for wear or damage after every few uses.

•  Do not use abrasive cleaners or steel wool.

•  Never immerse the hand mixer or stand in water or any other liquid.

•  To clean the outer surfaces, wipe with a clean damp cloth and dry thoroughly before  
 storing.

•  All the accessories and mixing bowl are dishwasher safer. 

•  Store the 2-in-1 Hand and Stand Mixer with the power cable loosely coiled.  
  Never wrap it tightly around the appliance.

 

 

 

 

 

 

 

 

 

Summary of Contents for 31789

















Reviews: