12
HOW TO ASSEMBLE THE BREAD MAKER AND USING
FOR THE VERY FIRST TIME
When the Bread Maker is used for the first time it may emit a slight burning smell when
first switched on. This is completely normal with a new heating element. You will need to
operate the Bread Maker empty for the very first use. This will also show you how easy the
Bread Maker is to use.
• Wash the bread pan and kneading paddle in hot, soapy water, rinse and dry
thoroughly.
• Place the Bread Maker on a flat, dry, heat-resistant surface.
• Position the bread pan in the baking chamber holding it at a slight angle and turning it
clockwise until it clicks into place.
• Fix the kneading paddle onto the drive shaft.
• Close the lid.
• Switch on at the socket.
• The Bread Maker will beep and the display screen will show the default setting
“900g, MEDIUM, 3:10”
• Press the MENU button repeatedly – the programme numbers will scroll through. Stop
pressing at programme number 12, BAKE. If you go past the number you require simply
keep pressing until programme 12 comes around again.
• Select programme 12, BAKE and press START/STOP.
• The Bread Maker will begin to count down and you can follow this on the
display screen. Leave the Bread Maker to BAKE for 10 minutes. You may hear some
intermittent clicks during this time.
• Press the START/STOP button firmly to stop the programme.
• Open the Bread Maker and allow to cool completely.
• Lift out the kneading paddle then remove the bread pan by turning anti-clockwise and
lifting out.
• Wash, rinse and dry the bread pan and kneading paddle again and replace.
• You are now ready to make your first loaf.
Summary of Contents for 62168
Page 1: ...INSTRUCTION BOOKLET Model 62168 BREAD MAKER ...
Page 2: ...2 ...