41
Problem
Possible Cause
Solution
Bread maker
17. Bread maker not operating/
kneading paddle not
moving.
Bread maker not switched on.
Bread pan not correctly
located.
Time delay selected.
Check on/off switch is in the
ON position.
Check pan is locked in place
correctly.
Bread maker will not start until
start time is reached.
18. Ingredients not mixed.
Did not start bread maker.
Forgot to put kneading paddle
in bread pan.
After selecting programme,
press the START/STOP button
to start machine.
Always make sure kneading
paddle is positioned correctly
on drive shaft in bottom of
bread pan before adding
ingredients.
19. Burning odour noted on
operation.
Ingredients spilled inside
baking chamber.
Take care when adding
ingredients to bread pan - if
ingredients spill into chamber
burning can occur.
20. Display screen shows
“H HH”.
Temperature inside bread
maker is too high - machine
still hot after the previous
baking procedure.
Pull the plug, take out the
baking pan and leave it to cool
at room temperature. Then
insert the plug and start again.
21. Display screen shows
“L LL” and machine beeps
continuously.
Temperature inside bread
maker is too low.
Press START/STOP button, open
lid and allow machine to return
to room temperature for 10 -
20 minutes.
22. Display screen shows
“E rr”.
Temperature sensor is faulty.
Contact Lakeland Customer
Services for further information.
Summary of Contents for 62168
Page 1: ...INSTRUCTION BOOKLET Model 62168 BREAD MAKER ...
Page 2: ...2 ...