42
CARE AND CLEANING
• Always ensure the Bread Maker is switched off and unplugged from the socket and
allow to cool completely before cleaning.
• Clean each part thoroughly before using for the first time and after every use.
• Check the parts for wear or damage after every few uses.
• Do not use metal tools in the non-stick bread pan - always use plastic, nylon or silicone
spatulas etc.
• Never immerse the base unit, cord or plug in water or any other liquid.
• To clean the unit and control panel, wipe with a clean, damp cloth and dry before
storing.
• Clean the lid and viewing window with a slightly damp cloth.
• Do not use abrasive cleaners, or steel wool.
• Wash the baking pan, kneading paddle, measuring cup and spoon in hot, soapy water,
rinse and dry thoroughly.
• If the kneading paddle is difficult to remove from the bread pan, pour in sufficient warm
soapy water to cover the paddle and leave to soak for 10 - 15 minutes. This will loosen
the paddle.
• If the kneading paddle still cannot be removed hold the drive shaft from underneath the
pan and twist back and forth until the kneading paddle is released.
• To clean the baking chamber, remove any bread crumbs by tipping them out or wiping
them away with a slightly damp cloth or clean pastry brush.
• If food residue burns onto the heating element, allow to cool completely then wipe
away with a damp cloth.
• Store the Bread Maker with the power cable loosely coiled. Never wrap it tightly around
the appliance.
Summary of Contents for 62168
Page 1: ...INSTRUCTION BOOKLET Model 62168 BREAD MAKER ...
Page 2: ...2 ...