13
HOW TO ASSEMBLE THE TOUCHSCREEN BREAD
MAKER AND USING FOR THE VERY FIRST TIME
When the Touchscreen Bread Maker is used for the first time it may emit a slight burning
smell when first switched on. This is completely normal with a new heating element. You
will need to operate the bread maker empty for the very first use. This will also show you
how easy the bread maker is to use.
• Wash the bread pan and kneading paddles in hot, soapy water, rinse and dry
thoroughly.
• Place the bread maker on a flat, dry, heat-resistant surface.
• Position the bread pan in the baking chamber holding it at a slight angle and turning it
clockwise until it clicks into place.
• Fix the kneading paddles onto the drive shafts.
• Close the lid.
• Switch on at the socket.
• The bread maker will beep and the display screen will show the default setting
“1250g, MEDIUM, 3:10”
• Press the MENU button repeatedly – the programme numbers will scroll through. Stop
pressing at programme number 12, CUSTOM. If you go past the number you require
simply keep pressing until programme 12 comes around again.
• Select programme 12, CUSTOM and press START/STOP.
• The bread maker will begin to count down and you can follow this on the
display screen. Leave the bread maker for 10 minutes. You may hear some
intermittent clicks during this time.
• Press the START/STOP button firmly to stop the programme.
• Open the bread maker and allow to cool completely.
• Lift out the kneading paddles then remove the bread pan by turning anti-clockwise and
lifting out.
• Wash, rinse and dry the bread pan and kneading paddles again and replace.
• You are now ready to make your first loaf.