8
INSTRUCTIONS FOR USE
ONE TEMPERATURE SETTING
This iron has one clever setting for use on all ironable fabrics. It creates the optimum
combination of temperature and steam output to iron your laundry. You do not need to
set the temperature, only the steam output.
This iron cannot be used on fabrics that cannot be ironed. If you are unsure, test the iron
on the inside of the hem of the garment.
Fabrics with these symbols are ironable, for
example, Polyester, Silk, Viscose, Wool,
Cotton and Linen.
Fabrics with this symbol are not ironable, for
example, Polypropylene, Elastaine
and Acrylic Fabric.
1. Fill the iron with tap water, as described in ‘Filling the Water Tank’.
2. Stand the iron upright on its anti-slip heel. Make sure the steam slider is turned to
‘No Steam’.
3. Plug in and switch on at the socket. The pilot light will blink and then illuminate.
4. When the pilot light goes out, the soleplate has reached temperature.
SETTING THE STEAM OUTPUT
WARNING:
This appliance generates high temperature steam. To avoid the risk of severe
burns, never touch the soleplate during use. Always hold the iron by its handle.
To ensure good steam output, always make sure the water tank is at least a quarter full.
To dry iron without steam, keep the steam control slider at ‘No Steam’.
1. Move the slider towards the front of the iron for more steam. The nearer it is to
‘Maximum steam’ the more steam will come through the soleplate.
You can choose the amount of steam you want to use for each garment.
2. Delicate synthetic fabrics should be ironed without steam.
No steam
Maximum steam
Summary of Contents for EASYSTEAM IRON 25478
Page 1: ...INSTRUCTION BOOKLET Model 25478 EASYSTEAM IRON...
Page 15: ...15...
Page 16: ...16...
Page 17: ...17 GEBRAUCHSANWEISUNG EASYSTEAM DAMPFB GELEISEN...
