6
ASSEMBLING THE MINI CHOPPER PLUS AND USING
FOR THE FIRST TIME
• Unpack the Mini Chopper Plus, remove all the packaging materials.
• Before first use, wipe the base unit with a clean damp cloth.
• Remove the lid, blade and bowl from the base unit. Hold the lid handle and turn the lid
anticlockwise to unlock and remove. Lift the blade out of the bowl holding the spindle,
remove and discard the plastic blade guard. Twist the bowl anticlockwise to unlock and
remove it from the base.
• Wash the lid, blade and bowl in warm soapy water, rinse and dry thoroughly. The blade
is sharp, when washing by hand, hold by the plastic spindle and clean with a brush.
• The bowl and lid are dishwasher safe, the blade is not.
• Make sure that all parts are clean and dry before assembling the product.
WARNING
: Do not insert the plug into a socket, or turn on the Mini Chopper Plus before
you have fully assembled.
• Place the base unit on a flat surface near a socket. With the arrows facing you, place
the bowl over the pin and turn clockwise until the bowl tab clicks fully into place in the
bowl lock.
• Hold the blade by the spindle and slot it onto the pin inside the bowl.