B
1. check that the glass corner gaskets are fitted to both hinges, then
2. With panel carefully supported, apply a continuous bead of clear silicone sealant along
entire length of glass groove (& into hinge recesses).
Glass corner gasket
**
A
If already fitted, carefully cut silicone & remove the corner trim from bottom glass corner.
Thoroughly clean & dry edge of glass, top to bottom. At this stage it is recommended to
check that the bypass panel will fit to the glass edge - in particular check that bottom
hinge & gasket fit beneath glass corner ** right upto the base trim
Lakes Coastline hinge bypass is fully reversible so can be fitted to LH or RH products.
Installation may be carried out at same time as parent unit, OR at a later date.
