BASIC TROUBLESHOOTING :
Screen hinges noisy / not moving smoothly : Apply sanitary silicone based
grease to hinge bearing inner diameters. Check that hinge seal is not
distorted or trapped in gap between profiles.
Leakage in area of bottom hinge : ensure bottom seal is pushed fully up to
bottom hinge.
Water pooling on inside of screen :
Check ‘fall’ of bath rim is toward bathing area (certain bathtubs are
unsuitable for screens of this type).
Leakage :
The sealing method described in these instructions relies on a continuous
seal between walls & bathtub before installing the screen (see fig A), &
positioning of the screen inside the ‘high’ point of the rim, then ensures a
watertight seal around the perimeter, & prevents ‘pooling’ against the
screen. Should ‘pooling’ be a problem it is likely due to incorrect screen /
rim positioning. In the unlikely event of a screen leak, water will be visible
on the outside of the screen itself or around the perimeter silicone seal
ONLY. Water / moisture appearing outside this area (ie at floor level, or
under bathtub) is normally due to incorrect bathtub / screen sealing.
Lakes Bathrooms Ltd
Alexandra Way
Ashchurch
Tewkesbury
Gloucestershire GL20 8NB
Service England, Scotland, Wales.
8.30am—5pm Mon ~ Thurs
8.30am—4.30pm Fri
Tel / HELPLINE : 01684 853870
Fax : 01684 857411
www.lakesbathrooms.co.uk
Email : admin@lakesbathrooms.co.uk
Service : Northern Ireland
Ian A Kernohan
Firtrees
Green Way Industrial Estate
Conlig
Northern Ireland BT23 7SU
8.30am—5pm Mon ~ Thurs
8.30am—4.30pm Fri
Tel : 02891 270233
Fax : 02891 270597
Email : info@iakonline.com
