O & M Manual – Insulated Case ATS Rev: October 2020
Publication Number:
MN0100700E
Version: V10.01.20
Page 34
S2 – Source S2
1.
S2 Setup – Source Type & Name
2.
S2 State – Information on S2 Source
3.
S2 - L-N Voltage (V), L-L Voltage (V), Frequency (Hz), Power (kW) and Power Factor (pf)
Readings
4.
S2 Voltage – L1-N Voltage (V), L2-N Voltage (V), L3-N Voltage (V)
5.
S2 Voltage – L1-L2 Voltage, L2-L3 Voltage, L1-L3 Voltage
6.
S2 Frequency – Frequency (Hz)
Module – Specific Settings to Current LSE8600 Controller
1.
S1 – Source Type & Name
2.
S2 – Source Type & Name
3.
Current Date & Time
4.
Battery Voltage
Alarms – Specific Alarms Seen by LSE8600 Controller
1.
Screens will depend on the total number of alarms detected and recorded by the LSE8600
controller. There will be a X/Y number in the top left corner of the display screen that will
indicate the total number of alarms recorded "Y" and the current alarm being displayed
"X".
Event Log – Specific Events Recorded by the LSE8600 Controller
1.
Screens will depend on the Events recorded by the LSE8600.
2.
Scroll through them manually or allow the auto-scroll feature to increment the screens.
Serial Port – Specific Information Regarding the LSE8600 Controller Communication Setup
1.
Screen 1 – Shows Baud Rate and Slave ID
About – Firmware Version Information
1.
Screen 1 – Variant (335), Application (Firmware Version), USB ID (Unique to LSE8600)
2.
Screen 2 – Bootloader (Firmware Version), Analogue (Firmware Version)
