the suction strainer). Use a compressed air hose to remove any water
trapped in the pump casing or flush the system with antifreeze. Do not
replace the plugs. Store them in the strainer basket for the winter.
Alternatively, remove the pump and motor from the plumbing entirely.
Store them indoors in a warm and dry place.
The STS tank and the purge line should also be drained of liquid to
prevent damage from freezing. To remove trapped water from the
separator, use a compressed air hose, directed into the acceptance
chamber. Alternatively, flush system with antifreeze.
Heat tracing or pipe insulation may be used. Please contact your local
supplier of these products to ensure proper usage.
10
