- 6 -
LAMAX DRIVE C7 car camera general settings
1) Key tones
enables or disables key tones.
2) Auto power off
allows you to set auto power off after 1 or 5 minutes.
3) Date/Time
sets the date and time on the device. Date format can also be chosen.
4) Date format
sets the format of the displayed date (year/month/day, month/day/year, day/month/year) or turns it off
completely.
5) Display location
allows you to display the GPs coordinates on the video. Works only when GPs module is connected correctly.
6) Display speed
Displays actual movement speed on screen and on the video. Works only when GPs module is connected correctly.
7) Display GPS
should be enabled for the proper functioning of the camera with the GPs module. The GPs icon appears on the
display and the speed (when enabled) is shown in km/h.
8) Refresh rate
sets the frequency in accordance with the grid frequency (on the european continent the frequency is 50 Hz, in
the americas and parts of asia it is 60 Hz).
9) USB
sets how the camera behaves when connected to a PC. Can be connected as a webcam (PC Cam) or plug ‚n‘ play
(msDC) device.
10) Rotate display
allows you to rotate the screen 180°. Handy when mounting the camera on the dashboard.
11) Screensaver
sets the display to auto power off when idle for 3, 5 or 10 minutes.
12) G-sensor level
Connected to other functions of the car camera. Can be set at three different levels of sensitivity (high, medium
and low). setting the proper sensitivity affects the functionality of the camera‘s other features. For the proper
functioning of “parking mode” we recommend a higher sensitivity for capturing minor collisions (when parking,
vandalism). For the proper functioning of the file locking feature we recommend a lower sensitivity to prevent
unwanted locking, for example, when on rough terrain. The g-sensor icon can be seen on the left of the display.
13) Motion detection
When motion detection is enabled, the camera begins recording the moment movement is detected in the lens
field of view. Camera stops recording after motion ceases.
14) GPS status
Information about the GPs connection.
15) Choose time zone
select the time zone where you are.
16) Restore factory settings
restores all settings back to their original state.
17) Format SD card
Formats the microsDHC card.
