Lambda Labs - Professional Acoustics DH-18 Manual
6. Wheelboard
Mounting
Attaching the DH-18 Wheelboard to the enclosure is done by the Combi Pin.
1. Remove the 2 x Combi Pins from their storage
position. To do this, push the release button
of the Combi Pin and pull out the pin. Just let
the Combi Pin connected to the wire rope
hanging at the outside.
18
6. Figure 1: DH-18 Wheelboard
PART
DESCRIPTION of 6. Figure 2
REFERENCE
a)
Combi
Pin
The Combi Pin is a Ball Lock Pin with an additional M10 thread.
Chapter
6
a)
6. Figure 2: Combi Pin
Size:
57x40x10mm
