Printed 07-2001
-8-
Form No. M1-0002
INSTALL LEFT HAMPER SUPPORT STRAP AND HITCH TUBE
LOCATE THE FOLLOWING:
1 ............................................... Hamper Support Strap (46)
1 ................................................... 5/16-18 X 2-1/4 Bolt (29)
4 ........................................................ 5/16 Flat Washer (21)
1 ................................................................. Hitch Tube (25)
2 ......................................................5/16-18 X 3/4 Bolt (30)
3 ............................................................ 5/16 Lock Nut (19)
1) Put 5/16 Flat Washer (21) on Bolts (29 & 30)(One Each). Ins
ert Bolt (30), from outside, through Hole “A”, then
through Hamper Support Strap (46) and loosely secure with 5/16 Lock Nut (19).
2) Insert crushed end of the Hitch Tube (25) into the oval hole on the front of the Chassis (1). Insert Bolt (29), from the
out
side through hole “B”, the Hamper Support Strap (46), then through Hitch Tube (25). Install 5/16 Flat Washer (21) and
loosely secure with Lock Nut (19).
3)
Insert Bolt (30) through Hole “C” then through Hitch Tube (25) and loosely secure with 5/16 Lock Nut (19).
DO NOT TIGHTEN HARDWARE AT THIS TIME!
