P
a
g
e
5
7.2.
Basic information about the menu navigation
With these four keys , , and you can easily reach every menu point. With the keys
you can get from the starting menu (an example is shown on the previous page) into every submenu to adjust
several values.
Basically:
the key acknowledges your choice (move to submenu, save a changed value)
the key deletes your choice (leave a submenu, delete an entered value)
the keys and scroll in the menus and change values
7.3.
Move to a submenu
Move to a submenu to:
adjust setpoint values
information display (actual values of temperatures)
relay test (only for the heating specialist)
adjust switching times
adjust time, weekday and date
This is how it´s done:
coming from the starting
display press the keys
or until the desired
submenu is displayed
acknowledge your choice with
the key
.
7.4.
Navigation in a submenu
in a submenu navigate with the keys and until the desired value is displayed (you will find
the description to the different values in the following chapters)
press the key to change a value or to acknowledge a choice
7.5.
Change of a setpoint value
Adjusted values can be changed, when this symbol appears:
change the value with the keys or
adjust the value with the key or delete it with the key
7.6.
Leave a submenu
With the key you can return to the main menu from every point without saving a change. When no key
is pressed for 5 minutes, the starting display is automatically reset.
esc
+
OK
OK
esc
+
OK
+
+
--
OK
+
OK
esc
esc
Your heating controller is structured like this
--
--
--
--
